Silvacore Pro by Duraflue Nu-lead lead roof flashing 0-45 degree FOR ALL DIAMETERS OF PIPE bits-n-bobs supported by an effective airwash

supported by an effective airwash system

Is cosmetic and not designed to make any kind of airtight seal (smoke is contained in liner so is purely an aesthetic device)

The DG Ivar stove has a distance to combustibles (rear of the appliance) of 400mm but adding a heat shield directly to the back reduces this to 150mm

For tiles and slate roofs

Silvacore Pro by Duraflue Nu-lead lead roof flashing 0-45 degree FOR ALL DIAMETERS OF PIPE bits-n-bobs supported by an effective airwashIt is for all diameters of twin wall clip together chimney pipe as you cut the rubber bit following a designated line with sharp scissors. Use when you have a slate roof and desire higher quality than the aluminium version. For tiles and slate roofs, lead is best. This is a twin wall clip together chimney part used to build a new chimney. Twin wall clip together chimney can be as close as 5cm to combustible materials (7cm if passing through a sealed