Charnwood VIPERIC Thread Adaptor Exert M33 x 3.5 to 1'' x 8tpi Still used in many traditional

Still used in many traditional crafts by bodgers

Also availble in other sizes on our website:4 Inches (12401)

An ideal workhorse for the busy workshop where power and generous capacity are required but budget and space do not allow a bigger machine

It is also suitable for holding natural-edged bowls between centres

Charnwood VIPERIC Thread Adaptor Exert M33 x 3.5 to 1'' x 8tpi Still used in many traditionalHeadstock thread adaptor. To fit onto a lathe with M33 x 3. 5mm headstock thread. Suitable to mount a Scroll Chuck or Faceplate with a 1" x 8tpi thread. The thread adaptor has spanner flats to aid tightening or removal. This thread adapter has 2 locking screws for securing the adaptor onto the lathe. Centre located 7mm from the end. Includes 10mm diameter blind hole for tightening or removing using a suitable knock out bar. Specification Adaptor Type